Topic Actions

Topic Search

Who is online

Users browsing this forum: No registered users and 32 guests

3D Printed Ships

Join us in talking discussing all things Honor, including (but not limited to) tactics, favorite characters, and book discussions.
3D Printed Ships
Post by Walks Alone   » Sun Feb 04, 2018 4:58 am

Walks Alone
Lieutenant (Junior Grade)

Posts: 43
Joined: Thu Feb 01, 2018 11:01 pm
Location: Wagga Wagga, NSW, Australia

Just wondering if anyone’s ever 3D printed any of the ships in miniature? Or even other such things... Pods... Missiles... Drones.... the Star of Grayson!
Top
Re: 3D Printed Ships
Post by MaxxQ   » Sun Feb 04, 2018 12:39 pm

MaxxQ
BuNine

Posts: 1553
Joined: Sat Aug 08, 2009 5:08 pm
Location: Greer, South Carolina USA

Walks Alone wrote:Just wondering if anyone’s ever 3D printed any of the ships in miniature? Or even other such things... Pods... Missiles... Drones.... the Star of Grayson!


Yes, there's been a few 3D prints of ships. Nothing commercially available, though, and most of the existing prints are test pieces to see how much detail we can include.

Although... there was a 3D printed SD, about 4-5 inches long, that was used to make molds for white and milk chocolate SDs that were handed out to various BuNine members (and David, of course) at HonorCon in 2013.

Most of the 3D models used for the various prints were from my meshes (check the links in my sig), and for obvious reasons, were not as detailed. As far as I know, the only things that have been printed are a few ships, an early version of the Dakota-class cutter (the 3D model can be seen in a few boat bay shots on my DeviantArt page), and yes, a Star of Grayson.

Just to reiterate though, none of these are for production, and were just test prints.

On the other hand, at some point, Final Sword Productions ( http://store.genreconnections.com/sagan ... simulator/ ) may release miniatures for the Saganami Island Tactical Simulator tabletop game. I can't say (as in I don't know, not that I'm not permitted to say) when or if it'll happen, but the guys at FSP have all my meshes to use for making miniatures, so...
Top
Re: 3D Printed Ships
Post by cthia   » Sun Feb 04, 2018 12:58 pm

cthia
Fleet Admiral

Posts: 14951
Joined: Thu Jan 23, 2014 1:10 pm

3D Star of Grayson.

Son, your mother says I have to hang you. Personally I don't think this is a capital offense. But if I don't hang you, she's gonna hang me and frankly, I'm not the one in trouble. —cthia's father. Incident in ? Axiom of Common Sense
Top
Re: 3D Printed Ships
Post by zyffyr   » Sun Feb 04, 2018 2:56 pm

zyffyr
Lieutenant Commander

Posts: 110
Joined: Fri Feb 19, 2016 5:26 pm

MaxxQ wrote:On the other hand, at some point, Final Sword Productions ( http://store.genreconnections.com/sagan ... simulator/ ) may release miniatures for the Saganami Island Tactical Simulator tabletop game. I can't say (as in I don't know, not that I'm not permitted to say) when or if it'll happen, but the guys at FSP have all my meshes to use for making miniatures, so...


Umm, they have had minis for SITS for years. Just on a different subpage than the books.

http://store.genreconnections.com/sits-miniatures/
Top
Re: 3D Printed Ships
Post by Walks Alone   » Sun Feb 04, 2018 5:36 pm

Walks Alone
Lieutenant (Junior Grade)

Posts: 43
Joined: Thu Feb 01, 2018 11:01 pm
Location: Wagga Wagga, NSW, Australia

A chocolate SD... they should sell those in the shops lol!

I guess it would be hard to get all the detail in without being prohibitively expensive.
Top
Re: 3D Printed Ships
Post by jchilds   » Sun Feb 04, 2018 6:22 pm

jchilds
Captain of the List

Posts: 722
Joined: Wed Feb 09, 2011 4:09 am
Location: Ottawa, ON Canada

I keep waiting for someone to commission a chainsaw artist to do an Honorverse ship...
Top
Re: 3D Printed Ships
Post by Walks Alone   » Sun Feb 04, 2018 10:08 pm

Walks Alone
Lieutenant (Junior Grade)

Posts: 43
Joined: Thu Feb 01, 2018 11:01 pm
Location: Wagga Wagga, NSW, Australia

Now THAT would be good! Especially because logs are long and thin, like ships.
Top
Re: 3D Printed Ships
Post by WLBjork   » Mon Feb 05, 2018 12:04 am

WLBjork
Commander

Posts: 186
Joined: Wed Jan 11, 2012 5:45 am

zyffyr wrote:
MaxxQ wrote:On the other hand, at some point, Final Sword Productions ( http://store.genreconnections.com/sagan ... simulator/ ) may release miniatures for the Saganami Island Tactical Simulator tabletop game. I can't say (as in I don't know, not that I'm not permitted to say) when or if it'll happen, but the guys at FSP have all my meshes to use for making miniatures, so...


Umm, they have had minis for SITS for years. Just on a different subpage than the books.

http://store.genreconnections.com/sits-miniatures/


Those are great for playing games with, but nowhere near big enough for what i suspect the OP is after.

Further, that game hasn't been updated since FSP and Ad Astra split, which is rather disappointing.
Top
Re: 3D Printed Ships
Post by MaxxQ   » Mon Feb 05, 2018 3:53 am

MaxxQ
BuNine

Posts: 1553
Joined: Sat Aug 08, 2009 5:08 pm
Location: Greer, South Carolina USA

zyffyr wrote:
MaxxQ wrote:On the other hand, at some point, Final Sword Productions ( http://store.genreconnections.com/sagan ... simulator/ ) may release miniatures for the Saganami Island Tactical Simulator tabletop game. I can't say (as in I don't know, not that I'm not permitted to say) when or if it'll happen, but the guys at FSP have all my meshes to use for making miniatures, so...


Umm, they have had minis for SITS for years. Just on a different subpage than the books.

http://store.genreconnections.com/sits-miniatures/


I realize that. The difference is that now that they have my meshes, they may be changing the ship miniatures they currently use. The current models are based on older art that isn't "canon", as opposed to my meshes, which are.
Top
Re: 3D Printed Ships
Post by Walks Alone   » Mon Feb 05, 2018 6:27 am

Walks Alone
Lieutenant (Junior Grade)

Posts: 43
Joined: Thu Feb 01, 2018 11:01 pm
Location: Wagga Wagga, NSW, Australia

Maxx, I have actually just come back from looking at your deviant-art page. You illustrations are the kind I could simply drink up!

I'm curious though, I can't seem to find any images of either CLACs or SDs? I'm wondering if those have been deliberately excluded for some reason?

Oh, one other thing... I was looking at the pinnace... is that a cargo bay in the back, or is that the engineering space?
Top

Return to Honorverse