Users browsing this forum: No registered users and 55 guests
Electronics techs | |
---|---|
by peterjack » Fri Jul 28, 2017 12:54 pm | |
peterjack
Posts: 1
|
How can one justify the need for electronics techs in the honor verse. I can see electricians or equivalent but not electronics techs. How in the world would one repair molecular circuitry?
Would it not be the equivalent of board swapping? Would not the whole system be in one chip? One would just replace the whole black box especially in combat. |
Top |
Re: Electronics techs | |
---|---|
by Jonathan_S » Fri Jul 28, 2017 2:27 pm | |
Jonathan_S
Posts: 8792
|
There was this passage from EoH
And and in that book
So the Peeps went for bulkier replaceable modules, but it seems the Manticoran warships carried electronics shops capable of doing repairs / rebuilds even to molecular circuitry. |
Top |
Re: Electronics techs | |
---|---|
by ldwechsler » Fri Jul 28, 2017 2:36 pm | |
ldwechsler
Posts: 1235
|
We don't know enough about the electronics of the time. Keep in mind the whole field is less than a century old. Who knows what will exist in a couple of thousand years? There may be shops where most of the electronics can be fabricated. In Chadwick's new book the latest snippet discusses the stupidity of not being able to replace parts and having to warehouse them because companies hold on to their software to make them. Also we can be certain a lot of the materials will change and a lot of other major evolutions will have taken place. Diagnostics can be built in and quickly connect with other parts. Perhaps self-repair. But chances are work has to be done and using computers and robotics might not do it. I recall that in Honor Among Enemies, Wanderman rewired a system that was supposed to have been knocked out. ReWIRED? We don't know enough to assume anything unless RFC writes it. But we know the techs exist. |
Top |
Re: Electronics techs | |
---|---|
by pnakasone » Fri Jul 28, 2017 9:00 pm | |
pnakasone
Posts: 402
|
We do not know how much of a component is molecular circuitry and how much of it may be more standardized electronic parts. Look at the size of the CPU of computer vs the rest of the mother board.
Also it is probably not just one molecular circuitry chip in a competent be several. Many if not most of them will be standard well tested designs that will handle basic functions. |
Top |
Re: Electronics techs | |
---|---|
by Fireflair » Sat Jul 29, 2017 11:40 pm | |
Fireflair
Posts: 591
|
Clarification:
Wanderman didn't re-wire, so much as do a software re-routing. The communication for the gravitic array ran through the same junction as the software that communicated with a radar array. He convinced the two systems to talk to each other by re-writing the software and connecting the programs to each other. Another tech didn't see how it could have worked at the time but it clearly did. Honor had them clean up Wanderman's program and put it in the saved files for future use. However, it's a point which is worth noting, molycirc is supposed to be a standard chunk of hardware that isn't typically repairable because it's so compact and the way it's designed. But you might convince systems to work together by providing software or hardware bridges. I figure electricians and electronics techs are still doing their jobs in the Honorverse as they are today. Electricians work on the wiring and motors end of things, like the motors that move the bay doors. Electronics techs are handling the fiddly bits like gravitic arrays and communications protocols. |
Top |
Re: Electronics techs | |
---|---|
by TangoLima » Sat Sep 16, 2017 8:08 pm | |
TangoLima
Posts: 286
|
Also who pulls and replaces damage molycirc ?
I an a retired engineering tech and there is a lot of fiddly bits stuff to keep busy with the more complex the more fiddly there is. |
Top |
Re: Electronics techs | |
---|---|
by kzt » Sat Sep 16, 2017 10:53 pm | |
kzt
Posts: 11360
|
David mentioned that the molecular electronics modules were pretty much both arbitrarily configurable and highly standardized.
|
Top |
Re: Electronics techs | |
---|---|
by Theemile » Sat Sep 16, 2017 11:47 pm | |
Theemile
Posts: 5241
|
Probably something along the lines of an eeprom, 20th centuary pd style. A group of standard packages that can be "imprinted" with a selected wiring scheme. Like current chip lithography, except able to be done on an individual scale, as needed from a pre-made file or modular cad system. All you would need is a supply of the various packages, a library of the standard wiring modules, and the imprinting device. If so, the most sensitive piece on a ship is not the electronics in the various systems, it is the database of wiring modules. ******
RFC said "refitting a Beowulfan SD to Manticoran standards would be just as difficult as refitting a standard SLN SD to those standards. In other words, it would be cheaper and faster to build new ships." |
Top |
Re: Electronics techs | |
---|---|
by WLBjork » Sun Sep 17, 2017 8:34 am | |
WLBjork
Posts: 186
|
Some rewiring was required, he dived under two of the tac sections desks to access the components required. For that matter, I suspect that most of the data is still transferred by cable of some sort, I'd expect battle steel to be rather like a faraday cage. |
Top |
Re: Electronics techs | |
---|---|
by WLBjork » Sun Sep 17, 2017 8:34 am | |
WLBjork
Posts: 186
|
Some rewiring was required, he dived under two of the tac sections desks to access the components required. For that matter, I suspect that most of the data is still transferred by cable of some sort, I'd expect battle steel to be rather like a faraday cage. |
Top |