Topic Actions

Topic Search

Who is online

Users browsing this forum: No registered users and 20 guests

Easier to manufacture metalic cartridge for the AOG?

This fascinating series is a combination of historical seafaring, swashbuckling adventure, and high technological science-fiction. Join us in a discussion!
Easier to manufacture metalic cartridge for the AOG?
Post by MadAmos   » Sun Jul 19, 2015 11:30 am

MadAmos
Lieutenant (Senior Grade)

Posts: 54
Joined: Tue Aug 16, 2011 7:58 pm

http://www.thefirearmblog.com/blog/2015/07/19/potd-58-schubarth-an-egg-of-brass-lead/

Seems like something the improvisers on the AOG side might come up with.
Top
Re: Easier to manufacture metalic cartridge for the AOG?
Post by MTO   » Mon Jul 20, 2015 12:40 am

MTO
Lieutenant (Junior Grade)

Posts: 37
Joined: Fri Feb 27, 2015 1:35 pm

MadAmos wrote:
Seems like something the improvisers on the AOG side might come up with.


Seems more complex to me. Your breach and your cartridge have to be molded to a matching shape with decent accuracy so that the rounds made at a different location in quantity will fit.

A simple cylinder is much easier to make, and can be cold rolled and crimped together. Much simpler than casting.

I think I don't understand why this gun was ever made, but it sure is unique.

Finally, isn't the AoG's biggest problem that they have no idea how to make mercury fulminate for the primer?
Top
Re: Easier to manufacture metalic cartridge for the AOG?
Post by Weird Harold   » Mon Jul 20, 2015 2:46 am

Weird Harold
Fleet Admiral

Posts: 4478
Joined: Thu Apr 24, 2014 10:25 pm
Location: "Lost Wages", NV

MTO wrote:Seems more complex to me. Your breach and your cartridge have to be molded to a matching shape with decent accuracy so that the rounds made at a different location in quantity will fit.


The advantage of using brass cartridges or seals is that they "fire-form" to fit each chamber exactly. New cartridges can be slightly undersized and still seal perfectly when fired. They can only be reloaded for that individual fire-arm with a full case reforming die, but the design presented in the OP probably isn't re-loadable, so that is a non-issue anyway.

The design would work well for a tech base that isn't perfectly standardized since molds for casting are easier to standardize than machine tools. As long as the ammunition and weapons are close enough for the brass to fire-form a sealed breach it would work just fine.

MTO wrote:Finally, isn't the AoG's biggest problem that they have no idea how to make mercury fulminate for the primer?


There is an entire book of the Writ devoted to substances that are not banned outright but carry dire warnings about accidental or deliberate creation. The Charisian Proto-chemist metions the need to make a study of that book for other useful, if dangerous, compounds.
.
.
.
Answers! I got lots of answers!

(Now if I could just find the right questions.)
Top
Re: Easier to manufacture metalic cartridge for the AOG?
Post by n7axw   » Mon Jul 20, 2015 9:08 am

n7axw
Fleet Admiral

Posts: 5997
Joined: Wed Jan 22, 2014 8:54 pm
Location: Viborg, SD

The priming caps have already been approved and the manufacture of them is not difficult. So the church will soon have them if they are not already in the field.

Don
When any group seeks political power in God's name, both religion and politics are instantly corrupted.
Top
Re: Easier to manufacture metalic cartridge for the AOG?
Post by jtg452   » Mon Jul 20, 2015 9:00 pm

jtg452
Captain of the List

Posts: 471
Joined: Sun Nov 06, 2011 3:46 pm

I think I'd rather have a breech loading caplock like their Ferguson knockoff than have to fiddle with an internal pinfire design like that one. At least it's an internal pinfire design. Pinfire ammo is a pain because you have to worry about bending or breaking the pin.

Be tough to reload one of them in the dark (you have to make sure the pin is located so the hammer can strike it or the round won't fire) and rough to try to reload while wearing gloves, too.
Top
Re: Easier to manufacture metalic cartridge for the AOG?
Post by MTO   » Tue Jul 21, 2015 8:41 pm

MTO
Lieutenant (Junior Grade)

Posts: 37
Joined: Fri Feb 27, 2015 1:35 pm

n7axw wrote:The priming caps have already been approved and the manufacture of them is not difficult.

Approved in Charis. I know they're publishing most things in their patents, but I thought they were keeping some details secret, where it would be a military secret.
Top
Re: Easier to manufacture metalic cartridge for the AOG?
Post by Louis R   » Thu Jul 23, 2015 4:53 pm

Louis R
Rear Admiral

Posts: 1298
Joined: Thu Jan 01, 2015 9:25 pm

Nope.

IIRC, they were reverse engineered, not betrayed, since Kaitswyrth captured stacks of them on the Daivyn.

Clyntahn has already approved them for the AoG, and the St Kylman is designed to use them.

MTO wrote:
n7axw wrote:The priming caps have already been approved and the manufacture of them is not difficult.

Approved in Charis. I know they're publishing most things in their patents, but I thought they were keeping some details secret, where it would be a military secret.
Top

Return to Safehold